sandar walƙiya don tashar tashar
sandar walƙiya don tashar tashar
Sai dai na yau da kullun na layin watsawa da hasumiya na sadarwa, muna kuma samar da wasu samfuran tsarin ƙarfe kamar hasumiya na soja, hasumiya don tsarin lantarki na layin dogo, sandar fitila, shingen bututu da sauransu.
A matsayinta na memba na ƙungiyar masana'antun ƙarfe na lardin Sichuan, Hasumiyar XY tana da gogewa da yawa a cikin sassa daban-daban na ƙarfe na musamman na kowane nau'in tallafin ƙarfe.Mun kuduri aniyar cewa wadannan sifofin karfe sun dace da ingantattun ma'auni na masana'antu kuma an gina su daidai da bukatun abokan cinikinmu.
| Sunan samfur | sauran hasumiya & karfe Tsarin |
| Alamar | Hasumiyar XY |
| Tsayin suna | 5-100m ko musamman |
| dandamali | 1-4 Layer ko musamman |
| Matsakaicin gudun iska | 120km / h ko musamman |
| Rayuwa | Fiye da shekaru 30 |
| Babban abubuwan da aka gyara | Hasumiyar sadarwar ƙarfe ta kusurwa ta haɗa da ƙafar hasumiya, jikin hasumiya, dandamalin aiki, dandamalin hutu, madaidaicin eriya, tsani, tire na USB, sandar walƙiya |
| Matsayin samarwa | GB/T2694-2018 ko abokin ciniki da ake bukata |
| Albarkatun kasa | Q255B/Q355B/Q420B/Q460B |
| Ma'aunin Raw Material | GB/T700-2006, ISO630-1995;GB/T1591-2018;GB/T706-2016 ko Abokin ciniki da ake bukata |
| Kauri | 1mm zuwa 45mm |
| Tsarin samarwa | Gwajin kayan danye → Yanke → Gyara ko lankwasawa → Tabbatar da girma → Flange/Sashe walda → Calibration → Hot Galvanized → Recalibration → Kunshi → jigilar kaya |
| Matsayin walda | Bayanan Bayani na D1.1 |
| Maganin saman | Hot tsoma galvanized |
| Matsayin galvanized | ISO 1461 ASTM A123 |
| Launi | Na musamman |
| Mai ɗaure | GB/T5782-2000;ISO4014-1999 ko Abokin ciniki da ake buƙata |
| Ƙimar aikin Bolt | 4.8; 6.8; 8.8 |
| Kayan gyara | 5% bolts za a isar da su |
| Takaddun shaida | ISO9001: 2015 |
| Iyawa | 30,000 ton / shekara |
| Lokaci zuwa tashar jiragen ruwa na Shanghai | 5-7 kwanaki |
| Lokacin Bayarwa | Yawancin lokaci a cikin kwanaki 20 ya dogara da adadin buƙata |
| size da nauyi haƙuri | 1% |
| mafi ƙarancin oda | 1 saiti |
GWAJI
Hasumiyar XY tana da ƙaƙƙarfan ƙa'idar gwaji don tabbatar da duk samfuran da muka ƙirƙira suna da inganci.Ana amfani da tsari mai zuwa a cikin samar da mu.
Sashe da Faranti
1. Sinadari (Ladle Analysis)
2. Gwaje-gwajen Jiki
3. Lankwasawa Gwaje-gwaje
Kwayoyi da Bolts
1. Tabbacin Load Gwajin
2. Ƙarfin Ƙarfin Ƙarfin Ƙarfi
3. Ƙarfin ƙarfin ƙarfi na ƙarshe a ƙarƙashin nauyin eccentric
4. Gwajin lankwasa sanyi
5. Gwajin taurin
6. Galvanizing gwajin
Ana yin rikodin duk bayanan gwajin kuma za a ba da rahoto ga masu gudanarwa.Idan an sami wani lahani, samfurin za a gyara ko goge shi kai tsaye.
Hot-tsoma galvanizing
Ingancin Galvanizing Hot-dip na ɗaya daga cikin ƙarfinmu, Shugabanmu Mr. Lee kwararre ne a wannan fanni mai suna a Yammacin-China.Ƙungiyarmu tana da ƙwarewa mai yawa a cikin tsarin HDG kuma musamman mai kyau wajen sarrafa hasumiya a cikin manyan wuraren lalata.
Matsayin Galvanized: ISO: 1461-2002.
| Abu | Kauri na zinc shafi | Ƙarfin mannewa | Lalata ta CuSo4 |
| Daidaitawa da buƙatu | 86 μm | Kada a tube rigar Zinc kuma a ɗaga ta da guduma | sau 4 |
Sabis na taro na hasumiya kyauta
Hasumiyar samfura hanya ce ta gargajiya amma ingantacciyar hanya don bincika ko zanen dalla-dalla daidai ne.
A wasu lokuta, abokan ciniki har yanzu suna son yin taron hasumiya samfurin samfur don tabbatar da cikakken zane da ƙirƙira yayi kyau.Don haka, har yanzu muna ba da sabis na taron hasumiya na samfur kyauta ga abokan ciniki.
A cikin sabis na taron hasumiya na samfur, Hasumiyar XY ta yi alkawari:
• Ga kowane memba, tsayin, matsayi na ramuka da mu'amala tare da sauran membobin za a bincika daidai don dacewa da dacewa;
• Adadin kowane memba da kusoshi za a bincika a hankali daga lissafin kayan lokacin hada samfurin;
Za a sake duba zane-zane da lissafin kayan, girman kusoshi, filaye da sauransu idan an sami wani kuskure.
Sabis na ziyarar abokin ciniki
Mun yi farin ciki da cewa abokan cinikinmu sun ziyarci masana'anta kuma su duba samfurin.Yana da babbar dama ga bangarorin biyu su san juna da kyau da kuma karfafa haɗin gwiwa.Ga abokan cinikinmu, za mu karbi ku a filin jirgin sama kuma mu ba da masauki na kwanaki 2-3.
Kunshin da kaya
Kowane yanki na samfuranmu ana ƙididdige su bisa ga zane dalla-dalla.Kowane lambar za a sanya hatimin karfe akan kowane yanki.Dangane da lambar, abokan ciniki za su san sarai guda ɗaya na nau'in da sassan.
Dukkanin guntuwar an ƙididdige su da kyau kuma an tattara su ta cikin zane wanda zai iya ba da tabbacin babu guda ɗaya da ya ɓace kuma a sauƙaƙe a sanya shi.
Jirgin ruwa
Yawanci, samfurin zai shirya a cikin kwanaki 20 na aiki bayan ajiya.Sa'an nan samfurin zai ɗauki kwanaki 5-7 na aiki don isa tashar jiragen ruwa na Shanghai.
Ga wasu ƙasashe ko yankuna, kamar Asiya ta Tsakiya, Myanmar, Vietnam da dai sauransu, jirgin ruwan jigilar kaya na China-Turai da jigilar kaya ta ƙasa na iya zama mafi kyawun zaɓi na sufuri.
